Mobile Payments Setup

We also provide a mobile application which can be download for different platforms. Take a look at one of the following options!

Set up PIN Pad

Power on PIN Pad

1. Press power button for three seconds.

To ensure Bluetooth is enabled on the PIN Pad

1. Press yellow button.
2. Press 'arrow button down' twice to 'Settings', press 'OK'
3. Press 'arrow button down' twice to 'Bluetooth', press 'OK'.
4. Ensure Mode is “Enabled”. If Disabled, press ‘OK’ to enable.
5. Once enabled, press red button back to start.

Make sure to press to get back to 'home' screen, Bluetooth won't work otherwise.

Download and install the app

1. Go to the App Store (iPhone) or the Play Store (Android).
2. Tap on the Search icon.
3. Enter “Worldnet Mobile”.
4. Select the Worldnet Mobile free application.
5. Install the App.

Enable Bluetooth

1. In the phone settings find Bluetooth settings.
2. Turn Bluetooth to ‘On’.
3. Phone should start scanning for the PIN Pad, If not manually scan for device.
4. The PIN Pad name will be similar to the serial number on the back of the PIN Pad, but beginning with ‘PP’.
5. Tap on the name and if asked to confirm a code tap 'OK' or 'Confirm'.

Setup the Worldnet App settings

1. Open Worldnet Mobile App.
2. In top right-hand corner click on settings dots for app settings.
3. Tap on ‘Terminal ID’, input Terminal ID sent by email.
4. Tap on ‘Shared Secret’, input Shared Secret sent by email.
5. Once done tap ‘back’ button on phone.
6. You should hear a beep, confirming the Bluetooth connection of the App to PIN Pad and the Bluetooth icon should go blue.